H K Wentworth Ltd

Online Catalogue • Electrolube • Conformal Coating

Nickel Screening Compound

Ref: NSC

Enhanced adhesion to wide variety of substrates
Provides even coating with superior scratch resistance
Efficient EMI/RFI screening coating with excellent attenuation levels
Fast drying at room temperature
Prevents static build-up
For professional use only

MSDS (.pdf)
TDS (.pdf)

Quantity:

Product options

Acrylic Protective Lacquer

Ref: APL

Offers excellent adhesion to all substrates
UV trace for inspection
May be removed with solvents such as Ultrasolve (ULS)
Wide temperature range and good dielectric properties
May be soldered through, allowing for repair
For professional use only

MSDS (.pdf)
TDS (.pdf)

Quantity:

Product options

Aquacoat (Water Based Coating)

Ref: WBC05L

Very low VOC conformal coating
Excellent solvent, humidity and mould resistance
UV trace for inspection
Clear colour

1 x 5L

TDS (.pdf)

Price: £178.97

Quantity:

Clear Protective Lacquer

Ref: CPL

Ideal for protecting ferrous metals from corrosion
Good resistance to humidity
Resolderability through the lacquer and for use as a flux

Aerosol MSDS (.pdf)
Bulk MSDS (.pdf)
TDS (.pdf)

Quantity:

Product options

Fluorocoat (Surface Modifier)(UV)

Ref: TFCF

Thin film coating offering excellent moisture resistance
Assemblies can be coated without masking
Applies a very thin film which breaks when connectors, etc are inserted
Contains UV trace for easy inspection

MSDS (.pdf)
TDS (.pdf)

Quantity:

Product options

HPA Conformal Coating

Ref: HPA

Resistant to mould growth
May be removed with solvents such as Ultrasolve (ULS)
UV trace for inspection
Excellent dielectric properties and with a wide temperature range
Approved to US MIL-1-46058C
For professional use only

Aerosol MSDS (.pdf)
Bulk MSDS (.pdf)
TDS (.pdf)

Quantity:

Product options

Non Acrylic Coating Thinners

Ref: DCT

Used to dilute non-acrylic conformal coatings for use in dipping and spraying applications
Normal thinning ratio for spraying applications is 2 parts coating to 1 part thinner

MSDS (.pdf)
TDS (.pdf)

Quantity:

Product options

Peelable Coating Mask

Ref: PCM250ML

Flexible latex for masking components
Completely hand-peelable, leaving no residue
Solvent resistant and non-contaminating to conformal coatings
Dries at room temperature
High film strength, does not break easily

12 x 250 ml

MSDS (.pdf)
TDS (.pdf)

Price: £89.26

Quantity:

Polyurethane Conformal Coating

Ref: PUC

Excellent resistance to humidity and mould
UV trace for inspection
Clear
Also available in an aerosol

Aerosol MSDS (.pdf)
Bulk MSDS (.pdf)TDS (.pdf)

Quantity:

Product options

Polyurethane Conformal Coating Thinners

Ref: PTH05L

The main uses of the thinners is to dilute the coatings for use in dip and spray coating
PTH may be used to maintain the viscosity of Electrolube PUC polyurethane coating in open tanks used in dip coating processes
PTH is a flammable solvent blend and should be used in a well ventilated area and all sources of ignition must be avoided

1 x 5L

MSDS (.pdf)
TDS (.pdf)

Price: £52.39

Quantity:

SCC3 Conformal Coating (Transparent)

Ref: DCA

UL approved
Resistant to common solvents
May be soldered through for rework

TDS (.pdf)
DCA200H - MSDS (.pdf)
Bulk - MSDS (.pdf)

Quantity:

Product options

SCC3 Elastomer Gel

Ref: DCE01L

Used to locally encapsulate high impedence/high voltage points
Use with a syringe to form a fillet of the gel around components

6 x 1L

MSDS (.pdf)
TDS (.pdf)

Price: £487.00

Quantity:

SCC3 Red Conformal Coating

Ref: DCR

Red version (DCR) available for camouflage
Resistant to common solvents
May be soldered through for rework

Aerosol MSDS (.pdf)
Bulk MSDS (.pdf)
TDS (.pdf)

Quantity:

Product options

SCC3 Remover Gel

Ref: DRG01L

Specifically formulated for the removal of Electrolube's cured silicone and water based coatings
Can be used for the removal of local areas of coating before repair

6 x 1L

MSDS (.pdf)
TDS (.pdf)

Price: £286.56

Quantity:

Universal Acrylic Thinners

Ref: UAT05L

Used to dilute non-acrylic conformal coatings for use in dipping and spraying applications
Normal thinning ratio for spraying applications is 2 parts coating to 1 part thinner
For professional use only

1 x 5L

MSDS (.pdf)
TDS (.pdf)

Price: £67.92

Quantity: